TEC FLAME TT-FRPL-EF01-28 - Cleaning, Recycling, and Support; Cleaning and Care; Product Recycling; After Sales Service

the same light levels as conventional bulbs, but use a fraction of the energy consumed. These LED bulbs are
maintenance –free and will not require replacing during the life of the product.
Cleaning WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE
CLEANING THE HEATER.
Fig .1 Fig.2 Fig.3
For general cleaning, use a soft clean duster – never use abrasive cleaners. The glass viewing screen should be
cleaned carefully with a soft cloth. DO NOT use proprietary glass cleaners.
To remove any accumulation of dust or fluff, the soft brush attachment of a vacuum cleaner should occasionally
be used to clean the outlet grille of the fan heater.
To clean the fuel effect: Remove the 6 screws, see Fig.1; remove the front glass panel, see Fig.2; unscrew the
rosebud log screw, see Fig.3. Wipe log set clean with a damp cloth.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life, it should not be disposed of with
household waste. Please recycle where facilities exist. Check with your Local Authority
or retailer for recycling advice in your country.
After Sales Service
Y
our product is guaranteed for one year from the date of purchase. Within this period, we undertake to repair or
exchange this product free of charge (excluding lamps & subject to availability) provided it has been installed