tecbot S1 Series - Page 21

17
Mopping function
Place the mop in place, open the water inlet,
slowly up the water tank with clean water, and close
the water inlet tightly.
Place back the water tank.
NOTES:
• Ensure your TECBOT S1 Series is fully charged.
• Fold any fringe tassels edges under the carpet to
prevent dirtying them during the mopping.
• Do not use the mop mode over a carpet.
• It is recommended to use purified or demineralized
water to prolong the life of the water tank.
• If you need to add water to the water tank, please
pause your TECBOT S1 Series before retrieving the
water tank for filling, and do not move your
TECBOT S1 Series away from its pause position.
• After the mop is done, please rinse and empty
the water tank and remove and rinse the
microfiber mop.