18
!
Regular maintenance
V-shaped main brush
It is recommended to clean up at least once a week.
• Turn over your TECBOT S1 Series, and remove
the V-shaped main brush cover by pushing on both
sides clips.
• Retrieve the V-shaped main brush upwards.
• Use the cleaning tool to remove any entanglement.
• Reinstall the V-shaped main brush and its cover.
Edge-cleaning brushes
It is recommended to replace after 6 months.
• Turn over your TECBOT S1 Series and remove the
edge-cleaning brushes by pulling them upwards.
• Clean the edge-cleaning brushes with a clean cloth.
• Reinstall the edge-cleaning brushes by snapping them
into place until you hear a “click” sound.
Please turn off your TECBOT S1 Series and retrieve the dust box or water tank when turning it
over for maintenance.
To Next Page
Loading...