19
Contact point and sensors
It is recommended to clean up once a month.
• Always keep all sensors’ windows clean.
• Wipe clean all sensors’ windows and contact points
with a soft dry cloth.
Driving wheel
It is recommended to clean up at least once a week.
• Remove entanglements and clean any dirt on the
driving wheel body and axle.
Dust box
It is recommended to clean up at least once a week.
• Retrieve the dust box from your TECBOT S1 Series
pressing its release clip.
• Push the release clip to open the dust box.
• Empty it.
• Reinstall the dust box.
To Next Page
Loading...