tecbot S1 Series - Page 24

20
air
sponge
HEPA
Water tank components
It is recommended to clean up once a month.
• Open the water tank top cover, and retrieve the HEPA
and sponge.
• Rinse the water tank, sponge, and air with clean
water. Do not use brushes or to clean the
• Use a hand vacuum cleaner or cleaning brush to clean
the HEPA Do not clean with water.
• Shake out the water droplets from the water tank,
sponge, and air
• Let them dry in the air for at least 24 hours.
• Assemble back the water tank and place it into your
TECBOT S1 Series.