23
Abnormal behavior.
Restart your TECBOT S1 Series by turning it
and on.
It doesn’t avoid obstacles.
Check and clean the front and side sensors’ windows.
It fell down the stairs during cleaning.
Check and wipe clean all the sensors' windows.
The remote control fails.
The remote control range is 4 feet / 1.2 meter.
Check your TECBOT S1 Series in turned ON and charge.
Replace the remote control batteries with new ones.
Clean the remote control and your TECBOT S1 Series
infrared transmitter, and check that there is no other
infrared transmitter device interfering with the signal,
such as a TV.
Cables, slippers, and other objects placed on the
the regular operation and scan functions of your
TECBOT S1 Series. Tidy up the wires, slippers, and other
things scattered on the It is also recommended
not to interfere with the cleaning path by moving your
TECBOT S1 Series or blocking it.
Tecbot Home App can not be paired.
• Check your home Wi-Fi router supports the 2.4 GHz
frequency band.
• Check your home Wi-Fi password input is correct.
• Check your Wi-Fi router does not have a
• Check if your TECBOT S1 Series Start/Pause button
light is blinking.
Add family members to the Tecbot Home App.
Tap “Me” to select family management.
Tecbot Home App does not have a map.
Tap “Smart plan cleaning.” Tap “more” to save the map
in the map management after the TECBOT S1 Series
icon appears.
“Selection cleaning” can not be selected.
You can edit the map after the map is saved.
Create smart cleaning.
Open the Tecbot Home App and tap “Smart.”
Tab the “+” to add.
To Next Page
Loading...