16
CALL FUNCTIONS
Making a phone call using the alphanumeric keypad
1. In Standby mode, enter the phone number using the alphanumeric keypad, and press the [ ] button to make a call.
2. To end the call, press the Right soft button or the [
] button.
Making a phone call using an external headset via the RJ11 port
1. Connect the headset to the unit via the RJ11 port.
2. Press the [
] button to enable the headset function.
3. Make the call using the alphanumeric keypad, and press the [
] button.
4. To end the call, press the [
] button.
Making a phone call using an external headset via 3.5mm audio socket
1. Connect the headset to the unit via the 3.5mm audio socket.
2. Make the call using the alphanumeric keypad, and press the [
] button.
3. To end the call, press the the [
] button.
Note: If two external headsets are connected to the unit, the headset connection via the 3.5mm audio socket will have working priority
over the headset connected via the RJ11 port. The ON/OFF hook and loudspeaker function on the unit will be disabled when a headset is
connected.
Making a phone call using Contacts
1. In Standby mode, press the Right soft button to access the Contacts menu.
2. Press the [
][ ] buttons to select the location that the desired contact details are stored in.
3. Press [ OK ] to view the contact.
4. Press the [
] button to make the call.
5. To end the call press the [
] button or replace the handset.
Making a phone call using Call Log
1. In Standby mode, press the Left soft button to access the Main menu > Call log.
2. Use the [
][ ] buttons to access your missed calls, outgoing calls or incoming calls.
To Next Page
Loading...