26
SETTINGS
1. In Standby mode, press the Left soft button to access the Main menu > Settings.
2. Press the Left soft button and use the [
][ ] buttons to access the submenu.
3. Edit the following submenu to define your settings.
Display settings
Home Screen: Sets up standby menu for your phone. It includes wallpaper and whether to display the time and date.
Backlight time: Sets up the waiting time of screen light, including 5 seconds/10 seconds/20 seconds or Always.
Brightness: Adjusts the contrast of the display for the varying lighting conditions.
Phone settings
Language: Select a default language for your phone.
Time and date: Denes the time, date, time format, date format and summer time.
Call settings
My Phone number: Enables or disables the Caller ID function to display your phone number to the person you are calling. This must be
supported by your network operator. Please contact your network operator for more information.
Call waiting: Active to be notified of a new incoming call while you have a call in progress or switch between the two calls.
This must be supported by your network operator. For more details please contact your network operator.
Answer mode: Allows you to press any button to answer a call.
Auto redial: Enables or disables the auto redial function. If your call fails to connect, your phone will attempt to redial 10 times.
Minute prompt: Enables or disables a notification alert 10 seconds before the next full minute is approaching during a call.
Answer prompt: Enables or disables a notification alert when the call is put through.
Call divert: Diverts an incoming voice call/video call to another number you assigned or your voicemail/videomail.
Call barring: Sets the limits on making and answering calls. This must be supported by your network. For details contact your
network operator for more information.
Network settings
Define the connection of your phone to a network.
Network Selection: Select your network connection. The phone supports Auto/GSM/WCDMA modes.
Search: Allows you to set Auto or Manual mode to search for a network connection.
Preferred network: Set up to connect to a network from the network list.