17
3. Select the contact you wish to call, and press the [
] button.
4. To end the call press the [
] button or replace the handset.
Making a phone call using Speed Dial
In Standby mode, lift the receiver and press the [ M1 - M8 ] buttons for the speed dialling feature.
Please ensure the contact numbers are pre-installed into the memory for this feature to work. Please refer to the following for setting up
the Speed dialling function.
To set up the Speed Dial button, follow the next steps:
1. In Standby mode, press the Left soft button to enter into the Main menu.
2. Use the [
][ ] buttons to select Contacts and press the [ OK ] button to access the submenu.
3. Select Phone and press the Left soft button to access the Options menu and select Settings > Speed dial.
4. Press the [ OK ] button to confirm.
5. Use the [
][ ] buttons to shift between the [ M1 - M8 ] locations.
6. Press Set to confirm your selection and your contact number.
7. Edit the following fields to manage your Speed dialling functions.
Editing
1. Select from [ M1 - M8 ] to access your desired contact number.
2. Press the [ OK ] button.
3. Use the [ C ] button to delete an incorrect entry and use the alphanumeric keypad to edit the contact number.
4. Press the
[ OK ] button to save the entry.
Remove an entry
1. Select your desired contact number from the [ M1 - M8 ] Speed Dial locations.
2. Press the Left Soft button to enter into the Options menu.
3. Select Remove.
4. Press the [ OK ] button to remove the entry.
To Next Page
Loading...