EN
10
• Do not mix up the HDMI sender and HDMI receiver, and the IR
blasterandIRreceiver.
• Powersupply:DC5V,usageonlythesuppliedpowerunit,donot
usethepowersupplyifitisdamaged.Makesurethespecification
matchedifusing3rdpartyDCadapters.
INTRODUCTION
This HDMI extender splitter includes one transmitter and four
receivers, extends 1 HDMI source to 4 HDMI displays over single
CAT6/6a/7 cable up to 40m. The highest resolution supported is
1920x1080@60Hz,andissupportsIRpassback,EDIDpassthrough
andonlyonepoweradapterforthetransmitterisneeded,thereceiver
is powered by the transmitter over CAT6 cable. Ideal solution for
HDMIexhibition,videoconferenceandshowcenter,etc.
FEATURES
• Distributes 1 HDMI source to 4 HD displays over network cable
simultaneously
• SupportsoneHDMILoop-out
• CompatiblewithCAT6/6a/7networkcables
• ExtendsHDMIsignalupto40moverCAT6cable
• Thehighestresolutionsupportedisupto1080p@60Hz
• Support20~60HzIRpassback
• SupportEDID
• SupportpowerfromtransmittertoreceiverunitoverCAT6cable
• Plugandplay
• Wall-mountedfunction,easyinstallation
PACKAGE CONTENTS
• Transmitterunitx1pc
• Receiverunitx4pcs
• DC5V/3Ax1pc
• IRBlasterextensioncablex1pc
• IRreceiverextensioncablex4pcs
• Usermanualx1pc
Note: above accessories are contented in the regular package for the
kitwith transmitter andreceiver. If buyHDMI ExtenderTX orHDMI
ExtenderRXseparately,thepackagecontentswouldbedifferent.
1x4 HDMI Extender Splitter