EN
10
• Do not mix up the HDMI sender and HDMI receiver, and the IR
blasterandIRreceiver.
• Powersupply:DC12V,usageonlythesuppliedpowerunit,donot
usethepowersupplyifitisdamaged.Makesurethespecification
matchedifusing3rdpartyDCadapters.
INTRODUCTION
This HDMI extender splitter includes one transmitter and eight
receivers, extends 1 HDMI source to 8 HDMI displays over single
CAT6/6a/7 cable up to 40m. The highest resolution supported
is 1920x1080@60Hz, and is supports IR pass back, EDID pass
throughand onlyone poweradapter forthe transmitteris needed,
thereceiversarepoweredbythetransmitteroverCAT6cable.Ideal
solutionforHDMIexhibition,videoconferenceandshowcenter,etc.
FEATURES
1. Distributes1HDMIsourceto8HDMIdisplaysovernetworkcable
simultaneously
2. SupportonHDMIloop-out
3. CompatiblewithCat.6/6A/7networkcables
4. ExtendsHDMIsignalupto40m/131ftoverCAT6cable
5. Thehighestresolutionsupportedisupto1920x1080p@60Hz
6. Support20~60HzIRpassback
7. SupportEDIDsettingfunction
8. SupportpowerfromtransmittertoreceiverunitoverCAT6cable
9. Plugandplay
10.Wall-mountedfunction,easyinstallation
PACKAGE CONTENTS
• Transmitterunitx1pc
• Receiverunitx8pcs
• DC12V/3Ax1pc
• IRBlasterextensioncablex1pc
• IRreceiverextensioncablex8pc
• Usermanualx1pc
Note: above accessories are contented in the regular package for the
kitwith transmitter andreceiver. If buyHDMI ExtenderTX orHDMI
ExtenderRXseparately,thepackagecontentswouldbedifferent.
1x8 HDMI Extender Splitter