Fault
connection
Make sure the battery and Inverter
terminal are clean
reverse
inverter
Contact vendor company for help
Warnings & Caution
Use of the device in life support applications where failure of the device can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its
safety or effectiveness is not recommended. Do not use the device in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide, and also not near flammable
materials, fumes or gases. Since the device requires adequate ventilation during
operation, do not block fan or cooling vents and do not cover the device. Do not operate
near car heating vents or in direct sunlight. Keep the device dry at all times and
disconnect when not in use. Turn OFF connected equipment before (!) starting your
engine. DO NOT plug a surge protector, line conditioner or UPS system into the device. If
you attach AC extension cords, use the heaviest practical gauge. Before connecting a
battery charger or adapter, check its manual to make sure that the technical specifications
of the device fall within the recommendations of the external battery charger or adapter.
Declaration of Conformity
The EU Declaration of Conformity can be requested at the
following address: www.technaxx.de/ (in the lower bar
"Declaration of Conformity").
Disposal
Disposal of the packaging. Sort packaging materials by
type upon disposal.
Dispose of cardboard and paperboard in the waste paper.
Foils should be submitted for recyclables collection.
Disposing of old equipment (Applies in the European
Union and other European countries with separate
To Next Page
Loading...
