White balance
Choose between Auto, Daylight, Cloudy and
Tungsten to fit your light situation.
Exposure
Fit the Exposure to your current circumstances by
choosing -3 to 3 in 1 step values.
Motion Detect
Check the box to enable motion detection.
Video with sound
Check the box to enable audio recording for video.
Reversing the line
Check the box to enable the reverse parking
distance lines.
Date stamp
Check the box to enable date and time stamp in
recordings.
Gravity sensing
(G-Sensor)
Choose between On=OFF, High, Middle and Low
for the G-Sensor.
High, Middle and Low enable the function.
If the G-sensor is activated, the recording function
is activated by a collision.
Button sound Check the box to enable the button sound.
Enhanced night vision
Check the box to enable the improved night vision
(4x LED).
Date / Time
Manually set date and time, to assure that the
video recordings have the correct date & time
Auto power OFF
Choose between On=OFF, 1Min, 2Min and 3Min.
1Min, 2Min and 3Min enable the function.
When for the set time no action (button press or
recording) is caused the device will turn off after
the set time.
Language
Choose betweenEnglish, German, French, Italian,
Czech, Polish, Dutch.
Frequency
Choose between 50Hz and 60Hz for video
frequency.
LCD lighting
Choose between On=OFF, 10Seconds, 1Min and
3Min for LCD lighting.
10Seconds, 1Min and 3Min enable the function.
After the set time the display will go in standby.
Recordings continue to be recorded.
To activate the display again press any button.
To Next Page
Loading...
