VIVID and USER mode. Press the BACK button on the device or the
MENU button on the remote control to exit the PICTURE settings.
After complete the adjustment, press the BACK button on the
device or the MENU button on the remote control to save settings
and exit.
Colour temperature
Press the ► button to go to the COLOR TEMPERATURE
settings. Now press the OK button to enter the COLOR
TEMPERATURE settings.
Press the ◄ ► buttons, to choose the settings you need to
adjust and then press the buttons ◄ ► to adjust the values of the
parameters of the options (MediumWarmUserCool).
Press the BACK button on the device or the MENU button on
the remote control to save settings and exit.
Aspect Ratio
Press the ► button to go to the ASPECT RATIO settings. Now
press the OK button to enter the ASPECT RATIO settings.
Press the ◄ ► buttons to choose the parameters. You can
choose between AUTO, 16:9 and 4:3. Now press the OK button to
select the setting you need.
Press the BACK button on the device or the MENU button on
the remote control to save the settings and exit.
Image projection mode
Image flip Select the (Gear) icon on the device interface or
press the MENU button on the remote. Press ◄ ► to reach projection
mode. Press the OK button to rotate the image as you need it.
Noise cancel
Press the ◄ ► buttons, to go to the NOISE REDUCTION settings.
Then press the OK button to enter the NOISE REDUCTION settings.
Press the ◄ ► buttons, to select the level of noise reduction,
and then press the BACK button on the device or the MENU button
on the remote control to save the settings and exit.
To Next Page
Loading...
Need help?
General
