Technaxx TX-168 User Manual

12
Remote Control & Functions
Activate (Arm)
The Car Alarm can be activated by pressing the remote control button
shortly (1x short "beep" and red light flash once). The external siren will
“beep” once as well.
Once the PIR sensor of the Car Alarm is activated, it takes about 10
seconds until the device is armed. When armed the red light flashes
every 5 seconds. After human action is detected, red light flashes
continuously. The siren of the Car Alarm and the external siren are
noising loudly together. The external siren will stop alarming after 30
seconds and the siren of the Car Alarm will stop alarming after 120
seconds.
The max. distance to arm the Car Alarm while leaving the vehicle is
~10m on open field.
Deactivate (Disarm)
To deactivate the Car Alarm and turn off the alarm sound, press the
button on the remote control shortly (2x short "beep" and red light
flashes twice). The external siren will “beep” twice as well. Then the red
light stops flashing.
The max. distance to disarm the Car Alarm before getting back into the
vehicle is ~10m on open field.
It is possible to operate the remote control from outside the closed
vehicle through the window.
It is possible to operate the remote control from outside the closed
vehicle through the window.

Technaxx TX-168 Specifications

General

Type	Security management
Connectivity technology	Wired & Wireless
Product type	Car alarm system
Housing color	Black
Alarm decibels	105 dB
Operating frequency	2400 MHz
Maximum outdoor range	10 m
Input voltage	12 - 24 V
Power source type	Battery, Cygar lighter
Package type	Box