6
Photos/Videos ( )
Press this button to get the recorded videos or photos which are recorded during live view
manually. These files are found under local media.
Camera Settings ( )
Under camera settings you can find & set the following sub menus:
Camera Name Edit the camera name
Camera Password Set camera password (To change the password you have to
reset the camera and set everything new)
WIFI Network Select the WiFi network to connect to the camera
Push Interval Select the interval for push notification from No limits, 1-30
minutes and off
Recording Mode This can be activated to “Alarm” or set to “Off” (Off means no
recording)
Time Zones Select your time zone to have the right hour in the app (For
summertime please select any country with your GMT +1.
Example: Federal Republic of Germany GMT +01:00. Choose
any country with GMT+02:00 for summertime and for Wintertime
set it back to your original country. In the example Back to
Federal Republic of Germany GMT +01:00.
Camera Info Here you can see the camera model, version, vendor, Total
space of the inserted MicroSD card and the free space of the
MicroSD Card
Reconnect If the camera is Offline, you can press this button to reconnect
the camera
Remove device With this button you can remove the selected camera from the
list
4. Event Record
The Easy IP-Cam has built-in a PIR Sensor (Passive Infrared Sensor) which can detect the
infrared signal emitting from a moving object like human or animal. The default setting of
the interval time to active the PIR Sensor is 30 seconds. The PIR Sensor only activates and
can be triggered after the end of the interval time. The interval time can prevent multiple
images of the same object or animal and recount after the video record finished.
To Next Page
Loading...
Need help?
General
