81
Trouble Shooting
ERROR MESSAGE AND SOLUTION:
Problem Reason How to settle the problem
Treadmill
doesn’t work
A : Did not connect the power
supply
Connect the power supply
B: Safety key not in place
Well put the safety key on the correct
position
C: transformer faulty Replace or repair transformer
D: electro circuit interrupted
Check the connection wire is in place
correctly.
Treadmill
stops
suddenly
A :safety key fallen off Properly attach the safety key.
B: the electronic system has a
problem
Phone/email for the after sale service
Safety Key
defective
Safety Key is damaged Change safety key
Key will not work
Change key input board, Change pcb
board or Change computer.
E1
A: Console wire loose or faulty
properly connect the wire or Change
the wire
B: computer defective Change the computer
Problem Possible cause Corrective action
Treadmill does not work
a. power supply disconnected Plug into socket
b. safety key disconnected Insert safety key
c .console cable disconnected Check console and signal cable
d. treadmill is not switched on Switch on
Belt does not run properly
a .running belt not lubricated enough Use silicon oil on running board
b. belt too tight Adjust running belt
Belt is slipping
a. belt is too loose Adjust running belt
b .Motor belt is too loose Adjust the motor belt
To Next Page
Loading...
