3.2 Device Installation
A libusb-win32 filter installer will appear directly after Installation of the driver.
If not, then go to the directory “C:\Program Files (x86)\Technica Engineering\USB to
BR Converter” and run install-filter-win.exe.
1) Select “Install a device filter” to install a device filter for the plugged-in device
then click next (If your device is not plugged-in, click cancel to exit wizard).
2) Select your USB-100BASE-T1 Converter device “LAN9500A USB 2.0 Ethernet
10/100 Adapter” then click Install.
To Next Page
Loading...
