4 CONFIGURATION
The USB-100BASE-T1 Converter is configured by using the Configurator window or
using directly the system try icon.
Figure 4—1: Configurator or System Tray Application
Every time a device is plugged the System Tray Application will appear in Windows
system tray.
Every device’s System Tray Application will be linked to a certain device using the
device’s serial number, so if you are using multiple devices every device will have its
own system- tray configurator tagged with a different serial number.
Figure 4—2: Two Devices (One Master, One Slave) and two Tray Icons
The Configurator tool can be used to configure the USB-BR device to work in two
modes either as a Master or Slave.
Note: The Device is initially configured to work as a Master.
Note: In a BroadR-Reach Link one device must be set as Master, the other must be
set as Slave.
To Next Page
Loading...
