Configuration Options:
• The “Master” button can be used to configure the BroadR-Reach port to work in
Master mode.
• The “Slave” button can be used to configure the BroadR-Reach port to work in
Slave mode.
• The “Send to System Tray” button can be used to hide the configurator window
and send it to the windows system tray.
• The “information” button can be used to open this help!
Note: The windows application used to control the system-tray application is installed
in windows startup folder
“AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup”
in order to run this application whenever windows starts.
If this is not desired then you can also start this application by running “Program Files
(x86)\Technica_Engineering\USB_to_BR_Converter\USB_to_BR_config_tool.exe”.
Please also make sure the USB_to_BR_config_tool.exe instance in the Windows
Startup is not running!
To Next Page
Loading...
