Technicolor CGA4233 - Connect your wired (Ethernet) network devices; Connect your wireless network devices; CGA4233 access points

3
5. Connect your wired (Ethernet) network devices
If you want to connect a device using a wired (Ethernet) connection:
1 Take the yellow Ethernet cable.
2 Connect one end of the Ethernet cable to one of the yellow Ethernet ports on your
CGA4233. Connect the other end of the Ethernet cable to your device.
6. Connect your wireless network devices
CGA4233 access points
The CGA4233 has two wireless access points:
• The 5 GHz access point oers superior transfer rates, is less sensitive to
interference and allows you to connect IEEE802.11a/n/ac wireless clients.
• The 2.4GHz access point allows you to connect IEEE802.11b/g/n wireless clients.
Use this access point for wireless clients that don’t support 5GHz.