Technicolor TG789vac User Manual

How to setup your Technicolor
TG789vac Radio Fibre Router
What is in the box?
• 1 Welcome letter including a setup guide sent by Call Flow Solutions
• 1 Router
• 1 Power Lead
• 1 Red ended Ethernet Lead
• 1 White DSL Ethernet Lead
Procedure:
1. Firstly you need to take your router out of the box and connect the power lead, please
do not turn it on until you have all other cables connected.
2. You then need to connect the Red Ethernet cable into the WAN port on the back of the
router.

Technicolor TG789vac Specifications

General

Wi-Fi Standard	802.11a/b/g/n/ac
Ethernet Ports	4 x 10/100/1000 Mbps
Type	Wireless Router
VoIP	Yes
Weight	450 g
Frequency Bands	2.4 GHz
DSL Support	VDSL2
Security	WPA, WPA2
WAN Ports	1 x RJ-11 (DSL)
USB Ports	1 x USB 2.0

Summary

Router Unboxing and Contents

What is in the box?

Lists all items included in the router package.

Router Connection Procedure

Connect Power and WAN Cables

Connect the power lead first, then the red Ethernet cable to the WAN port.

Connect to Power Supply (IDU)

Connect the red lead to the Radio's power supply unit (IDU).

Connect Hardwired Devices

Use yellow Ethernet lead for hardwired connections to ETH ports.

Power On and Initialization

Switch on the router and wait 10-15 minutes for all lights to stabilize.

Important Connection Notes

WAN Port Usage

The Red Ethernet port labelled WAN is exclusively for IDU connection.

Recommended Ethernet Port

Use the main Ethernet port labelled ETH1 for your computer.