Need help?Do you have a question about the Technicolor TG589vac and is the answer not in the manual?
General| Wi-Fi Standard | 802.11a/b/g/n/ac |
|---|---|
| Wi-Fi Frequency Bands | 2.4 GHz, 5 GHz |
| USB Ports | 1 x USB 2.0 |
| Type | Wireless Router |
| VoIP | Yes |
| Ethernet Ports | 4 x Gigabit Ethernet |
| DSL Support | VDSL2 |
| Security | WPA2 |
| WAN Port | Ethernet |
Guides on connecting the TG589vac to your service provider's network using DSL or WAN port.
Step-by-step instructions for powering on the TG589vac device.
How to connect local network devices using Ethernet cables to the TG589vac.
Steps to access the web interface and configure wireless access point settings.
Methods to connect wireless clients, including WPS, manual connection, and QR code scanning.
Recommendations and procedures for securing wireless communication using encryption keys.
How to access the TG589vac web interface from your local network or the Internet.
Procedures for backing up and restoring TG589vac configuration settings.
Solutions for common issues like non-functional LEDs or unreachable web interface.
Resolving issues like forgotten wireless keys or clients not appearing in the access point list.
Procedures for resetting the TG589vac to factory default settings via web interface or reset button.
To Next Page
