26
3 Wireless networking
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
4 Your wireless client may prompt you to select your access point. If this is the case, your access point will be listed with its
Network Name.
Connect your wireless client using WPS PIN code entry on your TG589vac
Proceed as follows:
1 Locate and note the WPS PIN of your wireless client. For more information, consult the documentation of your wireless
client.
2 Browse to the TG589vac web interface.
For more information, see “4.1.1 Accessing the TG589vac web interface from your local network” on page 34.
3 Click Wireless. The Wireless page appears.
4 On the left menu, select the access point to which you want to connect the wireless client to.
5 In the WPS Device PIN code box under Access Point, type the PIN code of your wireless client and click Set PIN code.
In case of problems
If you are having trouble connecting your wireless client via WPS, see “Cannot connect via WPS” on page 65 for more
instructions.
You can find the default network name on the product label of the TG589vac.
To Next Page
Loading...
