12
2 Setting up your TG589vac
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
2 Setting up your TG589vac
Setting up your main services
Proceed as follows:
1 Connect your TG589vac to your service provider’s network.
For more information, see “2.1 Connecting your TG589vac to your service provider’s network” on page 13.
2 Power on your TG589vac.
For more information, see “2.2 Powering on your TG589vac” on page 16.
3 Connect your network devices. To do this using:
A wireless connection, see “3 Wireless networking” on page 23.
A wired connection, see “2.3 Connecting your wired devices” on page 17.
4 Configure your TG589vac using the built-in web interface.
For more information, see “2.4 Configure your TG589vac services” on page 19.
Setting up additional services
When you subscribed you may have purchased additional services or items. For more information on how to:
Set up a mobile data fallback connection using a mobile Internet dongle, see “2.5 Set up a mobile fallback connection” on
page 20 for more information.
We recommended you to first connect one computer/tablet (if possible via a wired connection), then complete
the rest of the procedure and as a final step connect the other (wired and/or wireless) devices.
To Next Page
Loading...
