63
7 Support
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
7.2 Ethernet connection troubleshooting
Ethernet LED does not light up
Make sure that:
The Ethernet cable is correctly connected to the Ethernet port on your TG589vac and your computer.
You are using the correct cable type for your Ethernet equipment, which is at least UTP CAT5 with RJ-45 connectors.
To Next Page
Loading...
