Technicolor TG589vac - Broadband Connection

7
1 Getting started
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
1.2.3 Broadband connection
Overview
DSL port
This port can be used to connect your TG589vac to your service provider’s DSL network.
For more information, see “2.1 Connecting your TG589vac to your service provider’s network” on page 13.
WAN port
The Gigabit Ethernet WAN port allows you to use your TG589vac as a local router.
For more information, see “2.1 Connecting your TG589vac to your service provider’s network” on page 13.
Mobile Internet dongle (optional)
If you purchased the optional mobile Internet dongle, you can set-up a mobile data connection that can serve as a fallback
Internet connection.
For more information, see “2.5 Set up a mobile fallback connection” on page 20.
PSTN Port (optional)
The PSTN port allows you to connect your TG589vac to the traditional telephone network, i.e. the Public Switched
Telephone Network (PSTN). When the VoIP connection is not available, your TG589vac will automatically switch from VoIP
to the traditional telephone network.
For more information, see “2.3.1 Connection to the traditional telephone network” on page 18.
WANDSL
If your TG589vac does not have a PSTN port, this means that your TG589vac is VoIP-only. All calls passing through
your TG589vac will be done via VoIP.
Be aware that, if you are not connected to the traditional telephone network, emergency calls will not be possible
when your Internet connection is down or your TG589vac is powered off.
NickDJ.co.uk