Technicolor TG589vac - Connect TG589 vac to Service Provider Network

13
2 Setting up your TG589vac
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
2.1 Connecting your TG589vac to your service provider’s
network
Introduction
This section helps you to connect your TG589vac to your service provider’s network.
Choose your setup
To connect your TG589vac to the Internet you can either:
 Directly connect your TG589vac to your operator’s DSL network. In this setup your TG589vac is used as DSL gateway.
Follow the instructions from “2.1.1 DSL gateway setup” on page 14.
 Place your TG589vac behind another Internet access device (for example, an optical network terminal, a cable gateway,
etc.). In this setup your TG589vac is used as local router. Follow the instructions from “2.1.2 Local router setup” on page 15.
Internet
MediaAccess Gateway
Internet
Internet Access Device MediaAccess Gateway
NickDJ.co.uk