Technicolor TG589vac - Backup and Restore Configuration

52
4 TG589vac web interface
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
4.4 Backing up/restoring your configuration
Introduction
Once you have configured your TG589vac to your needs, it is recommended to back up your configuration for later use.
This way you can always return to your working configuration in case of problems.
Backing up your configuration
Proceed as follows:
1 Browse to your TG589vac web interface.
For more information, see “4.1.1 Accessing the TG589vac web interface from your local network” on page 34.
2 Click Gateway. The Gateway page appears.
3 Click Export.
4 Browse to the TG589vac web interface.
For more information, see “4.1.1 Accessing the TG589vac web interface from your local network” on page 34.
5 The TG589vac prompts you to save your backup file.
6 Save your file to a location of your choice.
Restoring your configuration
Proceed as follows:
1 Browse to your TG589vac web interface.
For more information, see “4.1.1 Accessing the TG589vac web interface from your local network” on page 34.
2 Click Gateway. The Gateway page appears.
3 Under Import Configuration, click Browse, open your backup file and then click Import.
4 The TG589vac restores your configuration.
5 The TG589vac restarts.
Do not change the file extension.
Do not edit the backup files as this may result in corrupt files making them worthless as configuration backup.
Backup files usually have .bin as extension.
NickDJ.co.uk