8
1 Getting started
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
1.2.4 Buttons
Overview
Power button
The Power ( ) button allows you turn your TG589vac on or off.
Wireless button
The Wireless ( ) button allows you to manually disable the wireless interface of your TG589vac. You can do this when
nobody is using the wireless network.
To turn the wireless interface on or off, briefly press the Wireless button.
WPS button
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy yet secure way without the
need to enter any of your wireless settings manually.
For more information, see “3.1 Connecting your wireless client via WPS” on page 24.
Reset pinhole button
The Reset pinhole button allows you to reset your TG589vac to factory defaults.
For more information, see “7.4 Reset to factory defaults” on page 66.
To know whether the access point is enabled or not, check the Wireless LEDs.
For more information see “Wireless LED” on page 10.
To Next Page
Loading...
