EasyManua.ls Logo

Technicolor TG589vac - Connection to the Traditional Telephone Network

Technicolor TG589vac
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
2 Setting up your TG589vac
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
2.3.1 Connection to the traditional telephone network
Combining VoIP with the traditional telephone network
Some service providers use the traditional telephone network (PSTN) as a backup solution for your VoIP connection. This
way, you can still make calls over the traditional network if the VoIP service is down (for example, in case your TG589vac is
powered off).
Applicability
Check if your TG589vac has a PSTN port on the back panel (for more information, see “PSTN Port (optional)” on page 7).
If your TG589vac has a PSTN port, connect this port to the Phone output of your filter or splitter using an additional
telephone cable (RJ11) that may be part of your package.
Be aware that, if you are not connected to the traditional telephone network, emergency calls will not be possible
when your Internet connection is down or your TG589vac is powered off.
NickDJ.co.uk

Table of Contents

Related product manuals