19
2 Setting up your TG589vac
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
2.4 Configure your TG589vac services
Step1: Browse to the TG589vac web interface
Proceed as follows:
1 Browse to http://192.168.1.1
(this is the default IP address of your TG589vac) on a computer or device that is currently
connected to your TG589vac (either wired or wirelessly).
2 The TG589vac web interface appears. By default, you are logged in as guest. This means that some items may be hidden.
To view all items, click Sign In and enter admin as user name and the ACCESS KEY printed on the product label of your
TG589vac as password.
Step2: Configure your wireless access point
1 Click Wireless. The Wireless page appears. The 2.4 GHz access point is selected in menu on the left.
2 Change the following settings under Access Point:
a In the SSID name box, type the network name that you want to use for this access point (if you do not want to use the
default one).
b In the Security Mode list under Access Point, select the security mode that you want to use for this access point. We
recommend to use WPA+WPA2-PSK.
c In the Wireless Password box, type the wireless key that you want to use for this access point. The key must consist of
8 to 63 alphanumeric characters. For example: MyKey123.
3 Click Save.
4 In the menu on the left, click the 5 GHz access point, configure the 5 GHz wireless Access Point settings (as in step 2)
and click Save.
5 Reconnect your wireless client(s) to the TG589vac using the new wireless settings.
Do not use WEP or None, since they are not secure.
WPS will be disabled if you select WEP.
To Next Page
Loading...
