11
C
Plug the other end into a working electrical outlet or power strip.
Make sure that the outlet is not controlled by a
switch that gets turned on and o.
D
Check the front of the Digital Adapter to see if the green light is on and
blinking.
If it is not on, check to make sure the power plug was plugged
into the power input “+
5V DC In” and that the other end
is plugged into a working electrical outlet.
Note: After activation, this light will remain on and constantly lit.
B
C
Please wait 20 minutes before calling to activate.
This will allow the Digital Adapter to connect to
the network and get the latest updates.
D
3698674A final4 11 10/5/11 4:38 PM
To Next Page
Loading...
Need help?
General
