Technicolor DCI401

24
Troubleshooting Guide
If the remote control does not work:
• Checkthatthebatteriesstillhavechargeandareinserted
correctly.
If there is no picture on the TV and the light on the Digital
Adapter is blinking:
• Checkyourcablesandmakesurethattheyareattached
correctly.
• UnplugtheDigitalAdapter,plugitbackin,thenwait5minutes
for it to reset.
If there is no picture on the TV and the light on the Digital
Adapter is on (not blinking):
• CheckthattheTVistunedtotheproperchannel
(Ch 3 or Ch 4).
• IfyouarealsoconnectedtoaVCR,tryturningtheVCRo.
• CheckthattheDigitalAdapterisconnecteddirectlytothe
cable provider outlet in your wall.
• Makesurethatallcablesarermlyconnected.
• ChecktheinputsettingonyourTV,makesurethatitisseton
HDMI,ANTorCABLE.
3698674A final4 24 10/5/11 4:38 PM