Technicolor DCI401 User Manual

23
Use LAST to recall the last channel.
Use GUIDE to display the Electronic Program Guide.
Note: Guide feature may not be oered on your
Digital Adapter.
Use INFO to display information relating to current
contents.
Use INPUT to toggle among TV Input signals.
Use VOL+ (or VOL-) to raise (or lower) the volume.
Use CH+ (or CH-) to select the next higher (or lower)
channel.
This remote will allow for volume control either
through the TV or through the digital adapter.
When Volume Punch-through is enabled, the
VOLUME and MUTE keys will control the TV.
Below are the steps required to disable Volume Punch-through
to the TV.
Step Description
1
Press and hold the MUTE key and DTA POWER key.
2 Hold both keys for 3 seconds.
3
The red LED on the remote will turn on.
4
Release both keys. Volume Punch-through is disabled.
Below are the steps required to enable Volume Punch-through
to the TV.
Step Description
1
Press and hold the MUTE key and TV POWER key.
2 Hold both keys for 3 seconds.
3
The red LED on the remote will turn on.
4
Release both keys. Volume Punch-through is enabled.
3698674A final4 23 10/5/11 4:38 PM

Technicolor DCI401 Specifications

General

Brand	Technicolor
Model	DCI401
Category	Set-top boxes
Language	English