Technicolor DCI401 User Manual

14
Setup Remote to Control the Digital Adapter
RF Remote Pairing Process:
When multiple remotes work in a shared space, interference can result.
To avoid this problem, the remote must be paired with the Digital Adapter.
Step 1
Turn on your TV using the buttons on the TV or the
TV remote.
Make sure power is connected to your Digital
Adapter and it is plugged into the TV.
Note: Your TV must always be set to the proper
channel (Ch 3 or Ch 4) or HDMI Input to match
the output channel on the back of your digital
adapter
Step 2
Install the batteries (included in your kit) in your new remote control.
Step 3
Make certain no other Digital Adapter remote is in the area.
Make sure power is connected to your Digital Adapter.
Turn on your TV using the buttons on the TV or the TV remote
(not a digital adapter remote in this instance).
Remote Control Setup Instructions
The RF Remote Control you received with your Digital Adapter Kit must
be setup before it will work with your Television and Digital Adapter.
This is a two step process.
First, you must setup the Remote to control the Digital Adapter.
Next you setup the Remote to control the television.
3698674A final4 14 10/5/11 4:38 PM

Technicolor DCI401 Specifications

General

Brand	Technicolor
Model	DCI401
Category	Set-top boxes
Language	English