15
Code appears on the screen.
Red light location
Blinks twice
Step 4
Press and hold both DTA
POWER and SELECT keys at
the same time.
Once the red light on the remote
turns on, then release both keys.
Wait 10 seconds, then a 3 digit
validation code will display on the
T V.
123
Step 5
Enter the 3 digit code using the Digital Adapter remote.
When remote is successfully paired with the digital adapter, the remote’s
red light will blink twice.
Proceed to next page to setup the Remote Control with your television.
3698674A final4 15 10/5/11 4:38 PM
To Next Page
Loading...
