Technicolor DWA0120 Quick Setup Guide

2
3. Connect your DWA0120 to the broadband service
Choose your setup
To connect the DWA0120 to the Internet you can either:
• Directly connect the DWA0120 to your service provider’s DSL network. Follow the
instructions from “Option A: DSL setup” on page2.
• Place the DWA0120 behind another Internet access device (for example, an
Optical Network Terminal (ONT) for fibre). Follow the instructions from “Option
B: WAN setup” on page2.
Option A: DSL setup
DSL
1 Plug the DSL cable into the grey port labelled DSL of the DWA0120.
2 Plug the other end of the DSL cable into your telephone wall socket.
Option B: WAN setup
WAN
1 Plug the Ethernet cable with the red connectors into the red port labelled WAN.
2 Plug the other end of the Ethernet cable into your Internet access device’s Ethernet
port.

Technicolor DWA0120 Specifications

General

Device Type	Gateway
Wireless Technology	Wi-Fi
Frequency Band	2.4 GHz
Maximum Data Rate	300 Mbps
Ethernet Ports	4 x 10/100 Mbps
Antenna	Internal
Wireless Standards	802.11 b/g/n
Security Features	WPA2
Ports	4 Ethernet, 1 USB