Need help?Do you have a question about the Technicolor TD5130 and is the answer not in the manual?
General| Operating Temperature | 0°C to 40°C |
|---|---|
| Storage Temperature | -20°C to 70°C |
| ADSL Standards | ANSI T1.413 Issue 2 |
| ADSL2 Standards | ITU G.992.3 (G.dmt.bis) Annex A |
| ADSL2+ Standards | ITU G.992.5 Annex A |
| Wireless | 802.11b/g |
| Ethernet Ports | 4 x 10/100 |
| USB Ports | 1 x USB 2.0 |
| VoIP | No |
| Security | WEP, WPA, WPA2 |
Lists the technical specifications and capabilities of the Wireless ADSL2+ Gateway.
Provides a description of the physical components and their functions on the device.
Describes the LEDs and controls located on the front of the Wireless Gateway.
Details the ports and buttons available on the rear of the Wireless Gateway.
Guides the user on how to connect the Wireless Gateway to a power source.
Explains how to establish wired network connections using Ethernet cables.
Details the process for connecting devices wirelessly to the network.
Instructions for connecting to the wireless network using SSID and passphrase.
Instructions for connecting the device to the DSL broadband service.
Guides Windows XP users on configuring network settings for the gateway.
Guides Windows Vista users on configuring network settings for the gateway.
Guides Windows 7 users on configuring network settings for the gateway.
Guides users through the initial setup process for the gateway.
Details how to configure the internet connection settings for the gateway.
Explains parameters for establishing an internet connection, like VPI/VCI and encapsulation.
Allows configuration of wireless network parameters like SSID and security.
Sets up security measures for the wireless network, such as WPA/WPA2.
Configures internal network settings, including LAN IP addresses.
Configures the DHCP server or relay for automatic IP address assignment.
Provides advanced settings for wireless network configuration.
Configures advanced parameters for the wireless router functionality.
Configures IPv6 connectivity settings for the WAN interface.
Sets up a static IPv6 address configuration for the WAN connection.
Manages Network Address Translation (NAT) settings.
Configures virtual server rules for port forwarding.
Configures firewall rules for network security.
Filters network access based on MAC addresses.
Blocks access to specific URLs or websites containing certain keywords.
Protects the network against Denial of Service (DoS) attacks.
Allows changing the administrative password for security.
Enables and configures remote access methods like HTTP, CLI, and FTPD.
Manages firmware updates for the Wireless Gateway.
Allows backing up and restoring device configuration settings.
Displays a summary of system, DSL, ATM, Internet, LAN, and wireless status.
Displays detailed status information about the DSL line connection.
Lists devices connected to the network via wireless connection.
Provides statistics on network connections and ports.
Displays detailed transmission and reception statistics for the DSL line.
Provides advice on connection performance and security best practices for wireless networks.
Lists the technical specifications of the Wireless ADSL2+ Gateway.
To Next Page
