Advanced
6.4.5 6 to 4
On My IPv6 Connection is, select 6 to 4.
Connection Name — Select an Internet connection to use. This is the connection that
you set up in SETUP > Internet Setup page. See “Internet Setup” on page 21.
6 To 4 Settings
Connection Name — Enter the connection name provided by your ISP or a desired
connection name.
6to4 IPv4 Address — Enter the 6 to 4 IPv4 address provided by your ISP.
6to4 IPv6 Address — Enter the 6 to 4 IPv6 address provided by your ISP.
6to4 Relay IPv4 Address — Enter the 6 to 4 relay IPv4 address provided by your ISP.
Primary DNS Address and Secondary DNS Address — If provided by your ISP, enter the
DNS server address. Otherwise, leave the fields blank.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.
Wireless ADSL2+ Gateway 52
To Next Page
Loading...
