Advanced
IPv6 Static Route
Rule Enable — Enable or disable rule.
Forwarding Policy Option — Select whether to enable or disable routing.
Rule Name — Enter desired rule name.
Source IP — Enter the source IP address.
Dest IP — Enter the destination IP address.
Gateway — Enter the gateway.
Interface name — Select the interface to implement the routing.
Click the Apply button to save and activate the static route or click the button to
discard your changes.
6.12 Multicast
This page allows you to configure IGMP and MLD settings.
To access the Multicast page, click ADVANCED > Multicast.
6.12.1 IGMP
Internet Group Management Protocol (IGMP), for IPv4 protocol, manages members
of groups of devices, called IP multicast groups. IGMP is used by IP hosts and adjacent
multicast routers to establish multicast group membership. It is an integral part of the
IP multicast specification, like ICMP for unicast connections. IGMP is used for online
video and gaming, and allows more efficient use of resources that support these
applications.
Wireless ADSL2+ Gateway 70
To Next Page
Loading...
Need help?
General
