Technicolor TD5130 User Manual

Advanced
6.1.2 MBSSID Settings
This page allows you to configure up to four virtual access points (VAP).
Click Advanced > Advanced Wireless > MBSSID Setting or click the MBSSID Setting
button.
Check the corresponding Enabled box of the VAP to enable it. If you enable a VAP,
you can modify its SSID and check its SSID Advertise box to allow wireless devices
scanning for a wireless network to detect the VAP.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.
6.1.3 Wireless MAC Filter
This page allows you to deny or allow devices to access the wireless network by
filtering their MAC addresses.
Click Advanced > Advanced Wireless > Wireless MAC Filter or click the MAC Filter
button.
Name (SSID) — Select the SSID from the drop-down list.
Wireless ADSL2+ Gateway 43

Technicolor TD5130 Specifications

General

Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
ADSL Standards	ANSI T1.413 Issue 2
ADSL2 Standards	ITU G.992.3 (G.dmt.bis) Annex A
ADSL2+ Standards	ITU G.992.5 Annex A
Wireless	802.11b/g
Ethernet Ports	4 x 10/100
USB Ports	1 x USB 2.0
VoIP	No
Security	WEP, WPA, WPA2