Technicolor MediaAccess TG650s User Manual

44
3CONFIGURATIO
N TOOLS
DMS-CTC-20111123-0002 v1.0
Executing a command
Proceed as follows:
1 In the command tree, select the command that you want to execute.
2 The command page appears:
Enter in the command parameters and click Apply.
Save your changes!
The changes that you make are only temporary and will be lost after restarting the MediaAccess Gateway. You
must click Save All to save your changes permanently.

Technicolor MediaAccess TG650s Specifications

General

Brand	Technicolor
Model	MediaAccess TG650s
Category	Gateway
Language	English