88
7 NETWORK SERVI
CES
DMS-CTC-20111123-0002 v1.0
7.4 Net work Time Server
Introduction
A Network Time Server is a server that makes sure that the time settings of your device (your MediaAccess Gateway) are
in sync with the official time.
This time will be used for features like:
Event logs
IPSec
SNMP
Requirements
Your MediaAccess Gateway must be connected to the Internet.
Specifying a time server for your MediaAccess Gateway
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see “Accessing the MediaAccess Gateway GUI” on page 33.
2 On the Technicolor Gateway menu, click Configuration.
3 The System Configuration page appears. On the Navigation bar, click Configure.
4 Under Time Configuration, select Auto-configuration and configure the following settings:
To Next Page
Loading...
