11
3 ASSOCIATE YOUR WIRELESS USB ADAPTOR TO YOUR ACCESS POINT
E-DOC-CTC-20100623-0002 v2.0
3.2 Manual Association
What operating system are you using?
If your computer runs:
Windows 7, proceed with “3.2.1 Association on Windows 7” on page 12.
Windows Vista, proceed with “3.2.2 Association on Windows Vista” on page 13.
Windows XP, proceed with “3.2.3 Association on Windows XP” on page 14.
If you are using the Access Control List (ACL)
Some access points enable you to allow/deny wireless clients to access your network based on their MAC address. If you
configured this feature on your access point, you must add the MAC address of the Wireless USB Adaptor to the ACL.
You can find this MAC address on the back of your Wireless USB Adaptor.
In case of problems
If you encounter problems during the installation, consult “5 Troubleshooting” on page 23.
To Next Page
Loading...
