13
3 ASSOCIATE YOUR WIRELESS USB ADAPTOR TO YOUR ACCESS POINT
E-DOC-CTC-20100623-0002 v2.0
3.2.2 Association on Windows Vista
Procedure
Proceed as follows:
1 On the taskbar, click the Start button, and then click Connect to.
2 A list of the available wireless networks appears.
Double-click your wireless access point.
3 Follow the instructions.
If your wireless access point does not broadcast its network name (SSID), it will not be displayed in this list. Click
Set up a connection or network and configure your wireless client manually. For more information, consult the
Windows help.
To Next Page
Loading...
