Technicolor TG582n Configuring Network Settings

Changing the TG582n Network Settings
This document will guide you through the process of changing the gateway address and/or DHCP pool
settings of your Technicolor TG582n modem.
Index
1. E
nsuring Telnet is installed on your computer
a. Installing on Windows Vista/7
2. A
ssigning a static IP address on your computer
a. Windows XP
b. Windows Vista/7
3. M
apping out the IP address changes you wish to make to your TG582n modem
4. A
ccessing the Network page in the modem GUI
5. Altering the DHCP Pool
a. Using Telnet to drop DHCP connected devices
6. C
hanging the Gateway address
7. Testing your new settings
8. US
B File and Printer Sharing
9. Troubleshooting
If you have already verified you have telnet, assigned an IP address to your computer, and removed all
other connected devices you may proceed directly to Step 4. Access the Network page in modem GUI
Version 1.1 Peter Harman

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+