Technicolor TG588v User Manual

4
AUTO-PROVISIONING
This router is designed to auto – provision, which means that all you need to do is:
Ensure the router is plugged into the power source and POTS filter (as per the image on
page 2) and is switched on.
The lights on the router will start to flash, which indicates auto- provisioning is taking place.
This may take 5 – 10 minutes.
When the DSL light on the router is solid and the Internet light on the router is flashing this
indicates that auto provisioning has taken place. Open your Internet Browser (the one you
use to access the Internet). If it opens then you are connected to the Internet and your
router is working.
If you are not able to open your Internet Browser then you will need to do a manual set up.
Follow steps 2 – 10 of this guide to manually set up.
After manual set up, if you are still not able to open your Internet Browser, then please
contact MWEB Tech Support to assist.
1
2
3
4
5
PowerAUS/EINReset

Technicolor TG588v Specifications

General

Wi-Fi Standard	802.11 b/g/n
Wi-Fi Frequency	2.4 GHz
WLAN data rate	Up to 300 Mbps
Ethernet Ports	4 x 10/100 Mbps
USB Ports	1 x USB 2.0
DSL Interface	ADSL2+
Device Type	Wireless Router
Firewall	Yes
DHCP Server	Yes
Security Features	WPA2
ADSL	ADSL2+