Technics EAH-AZ40 Operating Instructions

Preparation
20
1
Take the earphones out of the charging cradle.
• The earphone LEDs light (blue) and the earphones turn on about 4 seconds later.
A beep will sound, and the earphone LEDs (blue)* will blink slowly.
* The batteries are low when they are blinking in red.
2
Do Steps 2 to 3 of “Connecting by pairing (registering) your earphones with a
Bluetooth
®
device” (l 19).
3
Confirm that the earphones and the Bluetooth
®
device are connected.
Note
• This unit remembers the device lastly connected. Connection may be automatically established after step 1 (see
above).
• The unit can connect to a maximum of two Bluetooth
®
devices at the same time. (l 25, “Creating multi-point
connections”)
Connecting a paired Bluetooth
®
device
eah_az60_az40_pnqp1675za_full_eng_s.book 20 ページ ２０２１年９月２８日 火曜日 午前１０時７分

Technics EAH-AZ40 Specifications

General

Control type	Touch
Headset type	Binaural
Product type	Headset
Product color	Black
Wearing style	In-ear
Recommended usage	Calls/Music
Protection features	Water resistant
International Protection (IP) code	IPX4
Ear pads	Yes
Eartips material	Silicone
Charging case type	Wired
Charging case connector type	USB Type-C
Connectivity technology	True Wireless Stereo (TWS)
Ear coupling	Intraaural
Microphone type	Built-in
Battery life	330 min

Weight and Dimensions

Depth	24 mm
Width	22 mm
Height	26 mm
Weight	5 g
Charging case weight	30 g