Technics SA-EX100 Operating Instructions

I2
TAPE MONITOR
Before operation, set VOLUME to the “MIN” position.
"Press POWER to switch on
the power.
“Press SPEAKERS and check
the “SPEAKERS” Indication
lights up.
ae
Lights up
If the button is pressed once more, the
indicator will switch off and no sound will
be heard from the speakers.
[= [>to T=] Press to select the desired
source,
si
Lut
Example shows CD is selected as the
source. ‘
VCR 1: To watch video tapes (VCR 1)
TV/VGR 2: To watch TV or video tapes (VCR 2)
TAPE MONITOR]: To listen to cassette tapes (The
tape monitor indicator will appear.)
(See right.)
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
VOLUME
To
watch
a
video
or
the
TV,
set
the
TV
to
either
the
TV
mode
or
VIDEO
mode
as
indicated
below.
© To enjoy videos (VCR 1 or VCR 2)
Set it to VIDEO mode.
© To watch TV
Set it to TV mode.
VCR: To listen to video tapes
[TAPE
MONITOR]:
To
listen
to
cassette
tapes
(The
tape
monitor
indicator
will
appear.)
(See
below.)
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
Start the desired source.
(Refer
to
the
appropriate
operating
instructions
for
details.)
eT
a
level.
After listening is finished
Be
sure
to
reduce
the
volume
level,
and
switch
the
power
to
the
standby condition by pressing POWER.
When the tape monitor indicator Is lit or flashing
This indicates that the tape monitor function of this unit is ON.
To
listen
to
sources
other
than
a
tape,
be
sure
to
press
TAPE
MONITOR]
and
check
the
indicator
goes
out.
Lit or flashing
[TAPE MONITOR]

Technics SA-EX100 Specifications

General

Brand	Technics
Model	SA-EX100
Category	Stereo Receiver
Language	English